Classic Truck Cup Holder – 73-87 GMC Chevy Squarebody C10 Truck
Our 1973-1987 square body truck cup holder is a direct bolt in replacement for your classic pickup. Finally, an inexpensive and rigid solution to an age old problem.
1973-1987 Chevy Truck Cup Holder Features:
- ★ No drilling required.
- ★ Laser cut from 16 Gauge Stainless Steel.
- ★ Choice of 2 or 3 drop in style stainless steel cups fit a wide range of beverages and or stash spot for coins, pens, or whatever will fit.
- ★ Easy installation.
There are 4 types of cup holders:
- ★ Double Barrel w/ Small Cups
- ★ Double Barrel w/ Step Cups
- ★ Double Barrel w/ 1 Large and 1 Small Cup
- ★ Triple Barrel w/ Small Cups
These 1973-1987 truck cup holders stick out from the dash 7.5” and 2” down from the bottom of the dash. If you have a 4x4, aftermarket shifter or transfer case shifter please verify that they will work for your application prior to purchasing.
Check out our install video on YouTube and see how easy these classic truck cup holders are to install.
If you are doing interior work on your Square Body Truck, be sure to check out our Speaker Brackets and our other 73-87 Chevy Truck Parts & Accessories!
|Dimensions||30 × 15 × 15 cm|
1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987
|Interior / Exterior|
Blazer, C10, C20, C30, Jimmy, K10, K5, Sierra, Silverado, Squarebody, Squarebody C10, Suburban
Double Barrel (Small Cups), Double Barrel (Step Cups), Double Barrel (1 Step Cup, 1 Small Cup), Triple Barrel (Small Cups)
12 reviews for Classic Truck Cup Holder – 73-87 GMC Chevy Squarebody C10 Truck
Customers also bought…
Here are some other popular Classic Truck Parts for your custom build!
Wayde Bunker (verified owner) –
Ordered this for our 81 chevy and we are really happy with it. It holds a 16oz cup of coffee nicely, it also hold a beer can nicely too 😉
Joal (verified owner) –
Bought for my 1980 chevy truck. Was a few seconds to install, clean look, and shipped in a timely fashion!
Joseph H. (verified owner) –
The holder is too shallow and the drinks flop around too much.
Jeff Bradsher (verified owner) –
I love it and it fits well and it looks good in the truck
Philip Troost (verified owner) –
I love the look and design of this cup holder solution for my square body. I installed mine using the included hardware (it uses the ashtray screws already there to mount to the lower lip of the dash). There is just enough room to hold a 32oz “yeti” type cup. There was a bit of flex with 2 filled cups, not from the cup holder itself but the mounting area. I found 2 spots to drill additional 1/4” holes and used 1/4 bolts with larger flat washers on both sides. It is pretty much rock solid now, and functions as great as it looks! Thanks for the awesome solution!
Chris P. (verified owner) –
Awesome product. Not surprised though, as I’ve purchased from LS Fab before…and faster shipping than I expected coming from Canada.
Bradee M. (verified owner) –
Cup holders look great
Ramón Rivera (verified owner) –
Very good idea
Jose S. (verified owner) –
Looks amazing in my 73! Super easy to install and made high quality . Love it! Want to order the gat assist and the gate wires next!
jeremy s. (verified owner) –
Awesome part looks nice and works well.
Bryant C. (verified owner) –
Great addition to the 75. Choose the bigger cup holders so I could plop my phone in one and drink in the other! I will say, be careful if you have the plate powder coated… really tight fit getting the cup holders in after that!
Guillermo Jr Gutierrez (verified owner) –