1. Remove Driver side taillight. 2. Drill a 5/16 hole 1.25" down and 0.75" from the center of the tailgate cable bolt on the bed side. *Reference...
Tailgate Saver Installation for 1999-2006 Chevy Trucks
read more
LS Admin
Tailgate Saver Installation for 1973-1980 Trucks
We made this one easy! Please view the video below for instructions on how to install LS Fabrication's Tailgate Saver for 1973-1980 GMC Chevy Squarebody...
Hub Cap Clip Installation
DOWNLOAD TEMPLATE HERE - With scissors cut outer ring out of paper. -lightly place in the center of the rim and mark the center point of (6) holes....
S10 Tailgate Saver Installation for 1994-2004 Chevy Truck
1. Remove Passenger side Taillight. 2. Drill a 5/16" hole 3/4" down from the lower taillight hole and 3/4" back from box panel. *Reference Picture* 3....
OBS – Tailgate Saver Installation for 1988-1998 Chevy Trucks
*NOTE* If your truck has metal tailgate straps you will need to remove the driver side strap and rely on the passenger strap to support the weight of...
Tailgate Saver Installation for 1967-1972 Trucks
Option A - Using Tre5 Latches:1. Remove the lower bolt on the driver side tailgate striker plate. 2. Install the longer ball stud with provided thick...
Wheel Tub Installation for Classic Trucks Instructions
Step 1 Step 1:Center of Axle Normally Center Bolt Hole in Bottom LipMeasure Opening in TubCenter tub on Mark Step 2 Step 2:Place Tub on Bed SideEven Lip...
Scissor Hinge for Chevy Truck Installation Tips & Tricks
First off, congratulations on the purchase of your LS FAB Universal Scissor Hinges and thank you for your order and support! We put this little list...
Radius Bed Corners for Chevy Trucks Installation Instructions
Thank you for your purchase of the Apicella Designs 3100 Bed Corner Kit. Please read and review ALL instructions contained in this kit. Apicella Designs...
1947-53 Chevy Full Billet Dash Installation Instructions
Congratulations on the purchase of your 1947-1953 Chevy Truck Speaker Grille & Glove Box and thank you for supporting LS Fabrication on our journey....
