Billet Aluminum Hood Hinges
Showing all 9 results
-
Billet Hood Hinges – 81-87 GMC Chevy TruckFrom: $645.00Select options This product has multiple variants. The options may be chosen on the product page -
Billet Hood Hinges – 67-72 GMC Chevy TruckFrom: $645.00Select options This product has multiple variants. The options may be chosen on the product page -
Billet Hood Hinges – 73-80 GMC Chevy TruckFrom: $645.00Select options This product has multiple variants. The options may be chosen on the product page -
Billet Hood Hinges – 65-66 Ford TruckFrom: $645.00Select options This product has multiple variants. The options may be chosen on the product page -
Billet Hood Hinges – 67-72 Ford TruckFrom: $644.99Select options This product has multiple variants. The options may be chosen on the product page -
Billet Hood Hinges – 73-79 Ford TruckFrom: $644.99Select options This product has multiple variants. The options may be chosen on the product page
-
Billet Hood Hinges – 60-66 GMC Chevy TruckFrom: $645.00Select options This product has multiple variants. The options may be chosen on the product page
-
Billet Hood Hinges – 78-79 Ford BroncoFrom: $644.99Select options This product has multiple variants. The options may be chosen on the product page
-
Billet Hood Hinges – 88-98 GMC Chevy OBS TruckFrom: $645.00Select options This product has multiple variants. The options may be chosen on the product page
About Billet Aluminum Hood Hinges
Billet aluminum hood hinges replace the worn factory stampings that let a hood sag at one corner, sit proud against the fenders, or refuse to hold a gap once it has been off the truck a few times during a build. These CVF hinges are machined from solid aluminum with 6-axis gap adjustment built in, so the hood can be walked into alignment while it is still bolted on. Every kit uses the factory mounting points — no cutting, drilling or fabrication.
Chevy and GMC hood hinge fitments
- 1960-66 Chevy and GMC C/K — see 60-66 truck parts
- 1967-72 Chevy and GMC C10 — see 67-72 C10 parts
- 1973-80 Chevy and GMC Squarebody
- 1981-87 Chevy and GMC Squarebody — see 73-87 Squarebody parts
- 1988-98 Chevy and GMC OBS — see 88-98 OBS parts
Ford hood hinge fitments
- 1965-66 Ford F100 — see 61-66 Ford truck parts
- 1967-72 Ford F100 — see 67-72 Ford truck parts
- 1973-79 Ford F-Series
- 1978-79 Ford Bronco, stainless hardware
What pairs with a hinge swap
A hood that has been apart is the right time to sort the rest of the front end: Altman hood latch kits replace the stock catch, and the billet hood strut bracket upgrade lives with the rest of our billet aluminum parts. If the hinges are fine and the hood just will not stay up, a gas hood strut kit replaces the factory springs on 1999-2006 NBS Chevy trucks, and the Squarebody, OBS and S10 kits sit with each generation.